$

Special Offers

Sale
DCS Special Forces Plate Carrier Base Only - ATAC-AU
$222.00 $249.95
The DCS (Dynamic C...
The DCS (Dynamic Combat System) is a lightweight armour carrier, with removable sides. Can hold Nexus Soft Armour Front and Back and in adjustable side pouches,is also capable of holding large ballistic plates front and back, and 6 x 8 side plates. The DCS comes with an internal MBITR radio pouch. The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort. The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately). ..
Sale
DCS Special Forces Plate Carrier Base Only - ATAC-FG
$222.00 $249.95
The DCS (Dynamic C...
The DCS (Dynamic Combat System) is a lightweight armour carrier, with removable sides. Can hold Nexus Soft Armour Front and Back and in adjustable side pouches,is also capable of holding large ballistic plates front and back, and 6 x 8 side plates. The DCS comes with an internal MBITR radio pouch. The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort. The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately). ..
Sale
DCS Special Forces Plate Carrier Base Only - BLACK
$222.00 $249.95
The DCS (Dynamic C...
The DCS (Dynamic Combat System) is a lightweight armour carrier, with removable sides. Can hold Nexus Soft Armour Front and Back and in adjustable side pouches,is also capable of holding large ballistic plates front and back, and 6 x 8 side plates. The DCS comes with an internal MBITR radio pouch. The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort. The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately). ..
Sale
901 Chest Rig Base with front Zip Opening ATAC FG
$125.00 $138.95
Overview ...
Overview The Warrior Elite Ops 901 Front Opening Base (Patent Pending) MOLLE  platform has revolutionized the usage of the modern Chest platform. The 901 base has always been the basis for all the 901 rigs and we all know how good this kit is when used in an SF Role. The only draw back has always been that you need your buddy to help you fit it correctly before each Op. That..
Sale
901 Chest Rig Base with front Zip Opening Coyote Tan
$135.00 $138.95
The Warrior Elite ...
The Warrior Elite Ops 901 Front Opening Base (Patent Pending) MOLLE  platform has revolutionized the usage of the modern Chest platform. The 901 base has always been the basis for all the 901 rigs and we all know how good this kit is when used in an SF Role. The only draw back has always been that you need your buddy to help you fit it correctly before each Op. That..
Sale
901 Chest Rig Base with front Zip Opening OD Green
$135.00 $138.95
Warrior's Elit...
Warrior's Elite Ops 901 Elite 4 is set up on the 901 Front Opening (Patent Pending ) MOLLE Platform which has revolutionised the use of the modern Chest platform. The 901 base has always been the basis for all the 901 rigs, and we all know how good this kit is when used in an SF Role, the only draw back has been that you need your buddy to help you fit it correctly before each Op. That's why Warrior with the help of current SF Operators have introduced this variant, which is a front opening system comprising a heavy duty size 10 zip, 2 inch full Velcro closure and backed up by 3 press studs for additional security, this allows the user to get in and out of the rig at speed and without any assistance. This is the latest version with 3 D Spacer Mesh Lining for comfort and cooling, the new wider upper folding section is now 6 MOLLE loops wide allowing larger items such as Command Panels to be attached. This wider upper section now also allows a 10 x 12 Inch Ballistic Plate to be worn, turning the 901 into a versatile low profile Armour Carrier. The Warrior Elite Ops 901 Elite 4, comes with the following as standard; 4 x Warriors 5.56mm Open Mag Pouches ( Each Pouch holds 1 x PMag 5.56mm Mags ), 2 Utility Pouches, admin Pouch with New GPS / Strobe Pouch ( also holds I Phone etc. ), and a single Pistol / Small Torch Pouch. Also compatible with Warrior's Back Panel (sold separately).   ..
Sale
901 Elite 4 BLACK
$242.00 $260.00
CUSTOM ORDER 5...
CUSTOM ORDER 50 MIN 6 MONTH FLASH TO BANG The Warrior Elite Ops 901 Front Opening Base (Patent Pending) MOLLE  platform has revolutionized the usage of the modern Chest platform. The 901 base has always been the basis for all the 901 rigs and we all know how good this kit is when used in an SF Role. The only draw back has always been that you need your buddy to help you fit it correctly before each Op. That..
Sale
BLACK SPIDER OPTICS RED DOT LOW MOUNT
$144.00 $179.00
The Micro Red Dot Opt...
The Micro Red Dot Optic is customized for a perfect Picatinny rail fit on your AR-15. The sight features an advanced ambient light filter with auto-dimming capabilities and an auto-shut off feature to preserve battery life. It is a one piece optic with an aluminum nitrogen-purged tube. With a 3 MOA red dot and an anti-reflective coating, you’ll find the Micro Red Dot to be a competitive sight to those on the market. Allen key, rubber bikini cover, AAA battery and a 1-year replacement warranty are included. If you want a durable yet affordable micro red dot sight, look no further than Black Spider Optics. Push button controls and auto-dimming features make it easier to transition to low light environments.The M0129 Micro Red Dot Optic is the first of its kind to provide a high-quality optic with a rugged, durable mount, all while being specially designed for AR-15 Picatinny rails. You have a lot of options when it comes to finding the perfect optic for your firearm, and with Black Spider Optics, you can have a high-quality sight anyone can afford.Low mount..
Sale
BMF Burgen High Capacity Patrol Pack Coyote Tan
$391.00 $433.95
This SF Burgen fea...
This SF Burgen features removable side pouches, Internal light weight frame, large carry capacity, designed to be worn with belt kit. An awesome piece of professional kit favoured by UK Special Forces. The Warrior SF BMF Burgen (Burgen is the UK term for ruck) was originally designed as a large medic's kit to be carried in conjuction with the standard belt based load out used by the SAS. This means that the pack does not have a waist belt like many rucks.  It is supposed to ride fairly high on the shoulders, and the bottom is to "rest" on the pouches worn on the MK I & MK IV belt load-outs. SAS Reece (Recon) teams also found the BMF to be well suited to thier needs, because the many outside pockets allow for thier particular gear needs.  While roomy, the BMF is not desiged for super heavy loads, particulary if used without the MK I or MK IV belt kits, because the entire load would therefor be bourne by the shoulders. Remember, this is a PATROL PACK and not a deployment or expedition ruck.   ..
Sale
BMF Burgen High Capacity Patrol Pack MultiCam
$391.00 $433.95
This SF Burgen fea...
This SF Burgen features removable side pouches, Internal light weight frame, large carry capacity, designed to be worn with belt kit. An awesome piece of professional kit favoured by UK Special Forces. The Warrior SF BMF Burgen (Burgen is the UK term for ruck) was originally designed as a large medic's kit to be carried in conjuction with the standard belt based load out used by the SAS. This means that the pack does not have a waist belt like many rucks.  It is supposed to ride fairly high on the shoulders, and the bottom is to "rest" on the pouches worn on the MK I & MK IV belt load-outs. SAS Reece (Recon) teams also found the BMF to be well suited to thier needs, because the many outside pockets allow for thier particular gear needs.  While roomy, the BMF is not desiged for super heavy loads, particulary if used without the MK I or MK IV belt kits, because the entire load would therefor be bourne by the shoulders. Remember, this is a PATROL PACK and not a deployment or expedition ruck.   ..
Sale
Cargo Pack with Hydration Compartment ATFG
$80.99 $92.95
Warrior’s Cargo Pack ...
Warrior’s Cargo Pack is designed to attach to the back of any MOLLE Vest or Rig. It comprises 1 x large main compartment and 2 x smaller external compartments. Includes interior hydration sleeve and exterior MOLLE webbing for the addition of extra pouches. The Cargo Pack also comes with a detachable shoulder strap giving the operator the option of using the Cargo Pack as a small stand-alone backpack...
Sale
Cargo Pack with Hydration Compartment Coyote Tan
$88.00 $92.95
Warrior's Cargo Pa...
Warrior's Cargo Pack is designed to attach to the back of any MOLLE Vest or Rig. It comprises 1 x large main compartment and 2 x smaller external compartments. Includes interior hydration sleeve and exterior MOLLE webbing for the addition of extra pouches. The Cargo Pack also comes with a detachable shoulder strap giving the operator the option of using the Cargo Pack as a small stand-alone backpack. ..
Sale
Cargo Pack with Hydration Compartment MultiCam
$88.00 $91.31
Warrior's  Ca...
Warrior's  Cargo Pack is designed to attach to the back of any MOLLE Vest or Rig. It comprises 1 x large main compartment and 2 x smaller external compartments. Includes interior hydration sleeve and exterior MOLLE webbing for the addition of extra pouches. The Cargo Pack also comes with a detachable shoulder strap giving the operator the option of using the Cargo Pack as a small stand-alone backpack. ..
Sale
Command Panel Gen 2 with Fold out Map Sleeve A-TACS FG
$43.70 $47.95
Overview ...
Overview Warrior's Second Generation Command Panel is the latest addition to the warrior range. This new Generation Panel has evolved from Warriors Original Gen 1 Command Panel as a result of direct input from UK Front Line Combat Forces deployed in Afghanistan. The larger Velcro patch allows the addition of multiple ID patches and rank insignia. The Gen 2 model now features a rapid closure system in addition to the original heavy duty zip. This allows the Operator/Commander to quickly close the panel,  preventing the contents from falling out, in the event of  a fast moving Contact / Rapid Evac situation, Etc. The panel can be further secured at a later date in the conventional manner using the zip. The Warrior Command Panel allows the use of navigational items , maps, and other admin on a protected, flat clean, surface. Also features an internal transparent map sleeve. The Panel has 2 MOLLE  columns wide across the front and allows enough space for the attachment additional smaller pouches. On the inside there are 2 pockets and elastic loops to hold pens, compass, knife, chem lights, protractor, notebook etc. SIZE 160mm High 260mm Wide 35mm Deep The Warrior Gen 2 Command Panel takes up 6 horizontal rows of MOLLE on any compatible Plate Carrier, Chest Rig or Bag/Pack 500D Cordura Performance Specifications Weight: 7.1 Ounces per Square Yard Tensile Strength: Warp 453 lbs / Fill 348 lbs Tears Strength: Warp 14.1 + lbs / Fill 14.1 + lbs Abrasion: Wear Cycles 1955 Water Repellency: 100% Webbing Genuine US Mil Spec Webbing Standard Colour Option include Genuine Crye Multicam, Coyote, A-TACS AU, A-TACS FG Special Projects Colour Options include Black, Ranger Green, Olive Green 25mm (1 Inch ) Breaking Strain: 1200 lbs 38mm (1.5 Inch ) Breaking Strain: 1800 lbs 50mm (2 Inch ) ) Breaking Strain: 2200 lbs Threads Thread quality is fundamental to the construction, durability and strength of tactical equipment. Two factors have a negative impact on the life Span of threads 1) Mildew is one of the most common factors in the deterioration of military kit, causing it to rot and ultimately results in unacceptable failure. 2) Sunlight has a harmful effect on the performance of threads, and over time causes their deterioration. Warrior only uses the highest quality US Mil Spec nylon threads imported from the USA which are threated against both UV and Mildew. Infra-Red Properties All our Fabrics, Webbing, Plastic Hardware and Threads are treated at source to deliver the lowest I.R. Signature possible.     ..
Sale
Command Panel Gen 2 with Fold out Map Sleeve ATAC AU
$43.70 $47.95
Overview ...
Overview Warrior's Second Generation Command Panel is the latest addition to the warrior range. This new Generation Panel has evolved from Warriors Original Gen 1 Command Panel as a result of direct input from UK Front Line Combat Forces deployed in Afghanistan. The larger Velcro patch allows the addition of multiple ID patches and rank insignia. The Gen 2 model now features a rapid closure system in addition to the original heavy duty zip. This allows the Operator/Commander to quickly close the panel,  preventing the contents from falling out, in the event of  a fast moving Contact / Rapid Evac situation, Etc. The panel can be further secured at a later date in the conventional manner using the zip. The Warrior Command Panel allows the use of navigational items , maps, and other admin on a protected, flat clean, surface. Also features an internal transparent map sleeve. The Panel has 2 MOLLE  columns wide across the front and allows enough space for the attachment additional smaller pouches. On the inside there are 2 pockets and elastic loops to hold pens, compass, knife, chem lights, protractor, notebook etc. SIZE 160mm High 260mm Wide 35mm Deep The Warrior Gen 2 Command Panel takes up 6 horizontal rows of MOLLE on any compatible Plate Carrier, Chest Rig or Bag/Pack 500D Cordura Performance Specifications Weight: 7.1 Ounces per Square Yard Tensile Strength: Warp 453 lbs / Fill 348 lbs Tears Strength: Warp 14.1 + lbs / Fill 14.1 + lbs Abrasion: Wear Cycles 1955 Water Repellency: 100% Webbing Genuine US Mil Spec Webbing Standard Colour Option include Genuine Crye Multicam, Coyote, A-TACS AU, A-TACS FG Special Projects Colour Options include Black, Ranger Green, Olive Green 25mm (1 Inch ) Breaking Strain: 1200 lbs 38mm (1.5 Inch ) Breaking Strain: 1800 lbs 50mm (2 Inch ) ) Breaking Strain: 2200 lbs Threads Thread quality is fundamental to the construction, durability and strength of tactical equipment. Two factors have a negative impact on the life Span of threads 1) Mildew is one of the most common factors in the deterioration of military kit, causing it to rot and ultimately results in unacceptable failure. 2) Sunlight has a harmful effect on the performance of threads, and over time causes their deterioration. Warrior only uses the highest quality US Mil Spec nylon threads imported from the USA which are threated against both UV and Mildew. Infra-Red Properties All our Fabrics, Webbing, Plastic Hardware and Threads are treated at source to deliver the lowest I.R. Signature possible.     ..
Sale
DCS Base with 5 Open Mags, 2 Utility ATAC- FG
$333.00 $367.95
Overview ...
Overview The DCS (Dynamic Combat System) is a lightweight armour carrier, with removable sides. Can hold Nexus Soft Armour Front and Back and in adjustable side pouches,is also capable of holding large ballistic plates front and back, and 6 x 8 side plates. The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort. The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately). 1000D Cordura Performance Specifications Weight: 9.8 Ounces per Square Yard Tensile Strength: Warp 621 lbs / Fill 580 lbs Tears Strength: Warp 55.5 lbs / Fill 51.3 lbs Abrasion: Wear Cycles 3240 Water Repellency: 100% 500D Cordura Performance Specifications Weight: 7.1 Ounces per Square Yard Tensile Strength: Warp 453 lbs / Fill 348 lbs Tears Strength: Warp 14.1 + lbs / Fill 14.1 + lbs Abrasion: Wear Cycles 1955 Water Repellency: 100% Webbing Genuine US Mil Spec Webbing Standard Colour Option include Genuine Crye Multicam, Coyote, A-TACS AU, A-TACS FG Special Projects Colour Options include Black, Ranger Green, Olive Green 25mm (1 Inch ) Breaking Strain: 1200 lbs 38mm (1.5 Inch ) Breaking Strain: 1800 lbs 50mm (2 Inch ) ) Breaking Strain: 2200 lbs Threads Thread quality is fundamental to the construction, durability and strength of tactical equipment. Two factors have a negative impact on the life Span of threads 1) Mildew is one of the most common factors in the deterioration of military kit, causing it to rot and ultimately results in unacceptable failure. 2) Sunlight has a harmful effect on the performance of threads, and over time causes their deterioration. Warrior only uses the highest quality US Mil Spec nylon threads imported from the USA which are threated against both UV and Mildew. Infra-Red Properties All our Fabrics, Webbing, Plastic Hardware and Threads are treated at source to deliver the lowest I.R. Signature possible. Plastic Hardware Warrior only uses the highest quality ITW Military rated Clips and accessories imported from the USA. Soft Armour This product is capable of holding NEXUS soft armour. Contact us for more details.   ..
Sale
DCS Special Forces Plate Carrier Base Only - Coyote Tan
$222.00 $249.95
The DCS (Dynamic C...
The DCS (Dynamic Combat System) is a lightweight armour carrier, with removable sides. Can hold Nexus Soft Armour Front and Back and in adjustable side pouches,is also capable of holding large ballistic plates front and back, and 6 x 8 side plates. The DCS comes with an internal MBITR radio pouch. The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort. The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately).   ..
Sale
DCS Special Forces Plate Carrier Base Only - MultiCam
$222.00 $249.95
The DCS (Dynamic C...
The DCS (Dynamic Combat System) is a lightweight armour carrier, with removable sides. Can hold Nexus Soft Armour Front and Back and in adjustable side pouches,is also capable of holding large ballistic plates front and back, and 6 x 8 side plates. The DCS comes with an internal MBITR radio pouch. The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort. The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately). ..
Sale
Firestorm Hard Knuckle Gloves Coyote Tan
$37.00 $42.95
The Fires...
The Firestorm hard knuckle glove is constructed from Dupont fire-resistant Nomex and premium quality hide. This leather is soft, durable and hard wearing for use in the harshest of environments. Both fingers and palms are protected with raised padding for additional protection. All key areas are reinforced with double stitching. Great value for money. THESE GLOVES ARE SNUG FITTING, YOU MAY WISH TO ORDER ONE SIZE UP Made From Premium Quality Leather Nomex Hard Knuckle For Protection Ergonomic Cut And Fit For Comfort Double Stitched, Reinforced Etched Leather Palms Greater Dexterity Improved Grip Multi-purpose Tactical Glove Flame And Flash Protection     ..
Sale
Frag Belt with NIJ 111a Soft Armour Insert MultiCam
$300.00 $444.00
The  Warrior ...
The  Warrior Frag Belt is a large high backed version of our PLB Belt, with the added ability to accept a Level 3 a Soft Armour insert for protection of the lower back and hips against 9mm Submachine gun rounds, 9mm handgun rounds and in particular Fragmentation blasts from I.E.D.s etc up to 630 meters per second. The belt has 3 removable cushioned 3 D Mesh panels attached to the inner part of the belt which provide exceptional comfort and cooling. This version of the Belt Does NOT include Level 3a Soft armour,which can be purchased separately , this version comes with a removable padded stiffener which can be replaced by the armour if required later. The Frag Belt Can accept Warriors Elite Ops Slimline Harness and Warriors Elite Ops MOLLE Harness for heavier loads. ..
Sale
Front Opening MBITR Radio Pouch Gen 2 A-TACS FG
$43.77 $47.95
  Warrior...
  Warrior..
Sale
Grab Bag with 5.56mm MOLLE Pouches / Holds 6 Mags MultiCam
$143.80 $155.05
The Warrior Grab B...
The Warrior Grab Bag is built to last, it was designed with input from operators in the field. This bag allows you to carry all your essentials in your vehicle or over your shoulder. Large zips give you access to the bags main compartment which includes two dividers with a pocket for the MBT Radio, straps for chem lights, 3 x elasticated straps on the inside back wall to hold extra mags, torch, gloves etc. and a hook & loop compartment that includes pistol and magazine holster. There is also additional space for medical supplies, food, water bottle, etc. The exterior of the bag has a GPS pouch, two pistol mag pouches and 3 x 5.56mm removable MOLLE mag pouches (holds a total of 6 x 5.56mm mags). What makes this bag even better is a removable padded shoulder strap and the large over flap, which includes a map pouch, that covers the main zip compartment and M4 pouches and secures with a Fastex buckle ( the flap cover can be folded back and secured when not required ).. It disguises the contents, making the E & E Bag ideal for low profile operations, as a vehicle bag or simply an operational bag for carrying lots of kit. A new recent addition is a single MOLLE Pouch added to the chest section of the shoulder strap which can hold a single pistol mag or a small torch. The Warrior Grab bag also comes in two different variants as well as the standard; The Command variant has a command panel instead of the 3 x 5.56mm mag pouches. The Low Profile variant sees the 3 x M4 5.56mm mag pouches replaced with 3 x open MOLLE 5.56mm mag pouches. ..
Sale
Grab Bag with Command Panel Coyote Tan
$144.00 $155.05
...
The Warrior Command Grab Bag is built to last, it was designed with input from operators in the field. This bag allows you to carry all your essentials in your vehicle or over your shoulder. Large zips give you access to the bags main compartment which includes two dividers with a pocket for the MBT Radio, straps for chem lights, 3 x elasticated straps on the inside back wall to hold extra mags, torch, gloves etc. and a hook & loop compartment that includes pistol and magazine holster. There is also additional space for medical supplies, food, water bottle, etc. The exterior of the bag has a GPS pouch, two pistol mag pouches and a Gen 1 Command Panel  ( 3 x 5.56mm mags can be stored inside the main bag compartment via Elastic retention straps). What makes this bag even better is a removable padded shoulder strap and the large over flap, which includes a map pouch, that covers the main zip compartment  and secures with a Fastex buckle (the flap cover can be folded back and secured when not required). It disguises the contents, making the E & E Bag ideal for low profile operations, as a vehicle bag or simply an operational bag for carrying lots of kit. A new recent addition is a single MOLLE Pouch added to the chest section of the shoulder strap which can hold a single pistol mag or a small torch.   ..
Sale
Grab Bag with Command Panel MultiCam
$144.00 $155.05
...
The Warrior Command Grab Bag is built to last, it was designed with input from operators in the field. This bag allows you to carry all your essentials in your vehicle or over your shoulder. Large zips give you access to the bags main compartment which includes two dividers with a pocket for the MBT Radio, straps for chem lights, 3 x elasticated straps on the inside back wall to hold extra mags, torch, gloves etc. and a hook & loop compartment that includes pistol and magazine holster. There is also additional space for medical supplies, food, water bottle, etc. The exterior of the bag has a GPS pouch, two pistol mag pouches and a Gen 1 Command Panel  ( 3 x 5.56mm mags can be stored inside the main bag compartment via Elastic retention straps). What makes this bag even better is a removable padded shoulder strap and the large over flap, which includes a map pouch, that covers the main zip compartment  and secures with a Fastex buckle (the flap cover can be folded back and secured when not required). It disguises the contents, making the E & E Bag ideal for low profile operations, as a vehicle bag or simply an operational bag for carrying lots of kit. A new recent addition is a single MOLLE Pouch added to the chest section of the shoulder strap which can hold a single pistol mag or a small torch.   ..
Sale
IWB Kydex Pistol Holster
$45.00 $55.00
Our custom Tun Tavern...
Our custom Tun Tavern Tactical IWB (inside the waistband) holsters are made with .080 thick quality Kydex materials. they have smooth edges, black eyelets and a high sweat guard. This aids in comfort and protecting your firearm from body moisture. These IWB holsters come with a 1 3/4'' quick clip belt clip. These belt clips make it easy to put on and remove easily with or without a belt. pair this with our IWB spare mag pouch for a great concealed carry set! These are available in Black, Flat Dark Earth, Gray and White.  ..
Sale
Medium General Utility Pouch A-TACS AU
$32.55 $36.95
Warrior's Medium G...
Warrior's Medium General Utility Pouch Holds an assortment of kit including 6 x 5.56mm Mags.,Water Bottle. Features an adjustable quick release Non I.R. Reflective ITW Buckle. Modular webbing on the sides of the pouch allow the attachment of a wide variety of additional smaller pouches and items such as a knife or Torch. This pouch takes up 3 rows of MOLLE on any compatible plate carrier, chest rig, belt or bag. ..
Sale
Medium General Utility Pouch A-TACS FG
$32.55 $36.95
Warrior Medium Genera...
Warrior Medium General Utility Pouch A-TACS FG..
Sale
Medium MOLLE Utility Pouch Zipped A-TACS AU
$32.55 $35.95
  Warrior...
  Warriors Medium MOLLE Utility Pouch can be used as a utility pouch or to carry medical kit, bandages etc in 4 internal elastic loops, also features a lined internal pocket/sleeve. The Medium MOLLE Utility Pouch takes up 4 horizontal rows of MOLLE on compatible plate carriers, rigs and bags. SIZE 2? x 7.5? x 6? (60mm x 200mm x 160mm) Capacity 2 Litres (approximately) *pictures coming soon* ..
Sale
Medium MOLLE Utility Pouch Zipped A-TACS FG
$32.55 $35.95
  Warrior...
  Warriors Medium MOLLE Utility Pouch can be used as a utility pouch or to carry medical kit, bandages etc in 4 internal elastic loops, also features a lined internal pocket/sleeve. The Medium MOLLE Utility Pouch takes up 4 horizontal rows of MOLLE on compatible plate carriers, rigs and bags. SIZE 2? x 7.5? x 6? (60mm x 200mm x 160mm) Capacity 2 Litres (approximately) ..
Sale
Molon Labe T-Shirt
$14.00 $18.95
Western civilization ...
Western civilization owes its existence to King Leonidas, his 300 Spartans.  The god-King Xerxes, son of Darius assembled the largest coalition army the world had ever seen.  Reports are as high as 1.2 million made their way from Persia to invade Greece.  The narrow passage at Thermopylae allowed Leonidas a strategic and tactical advantage over the larger foe.  When ordered by Xerxes to lay down his arms, Leonidas responded with two words: Molon Labe'.  Translated directly it means COME & TAKE..
Sale
MS 2000 Strobe Compass Pouch A-TACS FG
$26.00 $29.95
  Warrior...
  Warrior'sUniversal Strobe/ Compass Pouch   Holds ACR MS-2000, uses ITW IR Clip for closure with elasticated renention for extra security.   Featuring 500D Cordura Crye MultiCam I.R.Treated Fabric   Genuine MultiCam US Mil Spec webbing with a breaking strength of 1200 lbs   US Mil Spec Thread treated against mildew and UV light..
Sale
MVG® - MOE® Vertical Grip MOE Slot System
$10.99 $19.99
Designed for use wi...
Designed for use with MOE Hand Guards and Forends, the MVG is a basic, light weight, cost-effective vertical fore grip that attaches directly to these hand guards without any rail needed. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul Dynamics.SM. All mounting hardware included.   Made in U.S.A.   E.A.R. Export Administration Regulations Controlled Product ..
Sale
OWB Custom Kydex Pistol Holster GLM (Govt. LE, MIL)
$65.00 $75.00
Tun Tavern Tactical's...
Tun Tavern Tactical's GLM Model (Government, Law Enforcement, Military Std) OWB (outside the waistband) holsters are made of .080 thick quality Kydex materials. They come with Kydex belt loops that will fit up to a 1 3/4'' shooters belt.They have smooth edges, black eyelets, black hardware and our signature shape. These holsters are made with a medium sweat guard to ensure comfort and not to impede with your movement no mater what the situation you find yourself in. All of our holsters go through a quality inspection to insure proper fit, form and function. These holsters are available in Black, Flat Dark Earth,and White. The size, shape and curves may vary with the make and model firearm that the holster is made for. ..
Sale
Polymer M4 5.56mm Style Mag- MOLLE/PALS Compatible BLACK
$27.00 $29.95
Polymer M4 5.56mm Sty...
Polymer M4 5.56mm Style Mag- MOLLE/PALS CompatibleRotates 360° to desired orientationStrong, durable construction with adjustable tensionPull to release mags, no catches or clipsAllows faster reload times..
Sale
Pro-Series OWB Kydex Pistol Holster
$85.00 $95.00
The Tun Tavern Ta...
The Tun Tavern Tactical Pro Series holsters are made of .080 quality Kydex materials. It has injection molded 1 3/4'' canted belt loops. These holsters have an adjustable retention system. You can set the retention to your preference simply by adjusting the Phillips  screws located on the trigger guard side of the holster. Our Pro Series holster have one of the smallest profiles you will find in a OWB Kydex holster. These holsters include finishing washers, black oxide coated screws and blackened stainless steel clutch washers.The clutch nuts aid in the retention of the hardware. No more worrying about loose or missing screws. All edges are smooth and polished. These holsters are made with a medium sweat guard. Try our Pro Series holster and see why we consider these to be the best OWB holsters on the market today. The size, shape and curves may vary with the make and model firearm that the holster is made for. These holsters are made with a 0°,5° or 10° cant. You must specify which cant you want when ordering your holster. These holsters are available in Black, Flat Dark Earth, Gray and White.  ..
Sale
Recon Plate Carrier SAPI Coyote Tan
$262.67 $308.95
Overview The RPC-S...
Overview The RPC-SC is the latest evolution of plate carriers from Warrior Assault Systems. Designed to be a lightweight and versatile low profile armour carrier, offering enhanced mobility without compromising protection. The RPC has been designed to hold SAPI Plates both front and back, while the RPC-SC has been developed to hold U.S. Shooters Cut / Swimmers Cut stand alone plates. Plate pockets have been backed with 3D mesh for added ballistic performance, comfort and dispersal of body heat. The Recon Plate Carrier comes standard with ladder style cummerbunds that attach to the RPCs front via 2 removable ITW SR Clips. This allows rapid access when getting in and out of the RPC (ITW SR Clips have a combined breaking strength of 600lbs per side). The RPCs shoulders can be worn in 3 different configurations as a slick low profile with the addition of velcro padded shoulders and wrap around sleeve for hydration and comms channeling. The RPC comes as standard with a removable MOLLE front flap held in place by 2 vertical SQM clips and strong velcro which allows the panel to be removed and replaced with a wide variety of preconfigured weapon-specific pouch panels and Warrior’s new Pathfinder Chest Rig. The RPC integrates with Warrior’s new Back Panel Made from Genuine US Mil Spec Materials and Hardware.NOTE: AS OF MAR 2016 SHOOTER'S CUT MODEL is special order 100 units or more.  If you wish to purchase these in shooter's cut, please email for a quote. ..
Sale
Reflex Mag Pouch MK3 AR10/AR15
$36.99 $40.00
...
The original Reflex Mag Pouch was designed to make magazine exchanges fast and simple. It works by cycling the rear magazine forward and holding it there so that it doesn't fall out during dynamic movements.  Cycling the rear magazine forward leaves a space behind it, so that empty or partially full magazines can be easily inserted and in the same quick motion, allow you to draw the next magazine.  The Mk2 introduced the ability to adjust magazine capacity (double-stack, single-stack, and low-profile) for two reasons.  The first reason is because different missions can require different load-outs. The number of mags you carry may be different for a raid vs a vehicle patrol vs a foot patrol.  The second reason is so that you can tailor your silhouette based off environment.  For example, bulk isn't such a concern in open terrain, but if you're operating in a vehicle or about to enter a passenger plane or bus, bulk will be an issue.  And the Mk2 allows you to make these adjustments quickly, easily, and while it is mounted.  The Mk3 takes it a step further by being able to handle both .308 and .223 calibers magazines as well as a new Reflex mechanism for smoother cycling.  In the double-stack configuration the Mk3 is compatible with USGI, PMAG 25 LR/SR, 20 LR/SR, FAL, M-14, and HK.  In double-stack it is not compatible with AK style magazines, but can be set to handle AR-15 magazines.  In single-stack or low-profile configurations it is compatible with all 7.62/.308, to include AK magazines, and AR-15 sized magazines. *Patent No. 9,097,489..
Sale
RICAS COMPACT DA with 5 M4 Open Mags, 2 Utility, 1 Admin MC
$330.00 $389.95
Warrior.....
Warrior..
Sale
New
Totally Bad-Ass XM42 Flame Thrower
$900.00 $1,000.99
This is a Gen 3 (late...
This is a Gen 3 (latest/most recent generation) Powdercoated Illusion Purple RH XM42 handheld flamethrower!  CONUS ONLY!  LEGAL FORM MUST BE FILLED OUT BEFORE ITEM SHIPSMANY COLORS AVAILABLE - EMAIL FOR MORE OPTIONSThe XM42 is the world’s first fully handheld, grab and go portable flamethrower on the market. Check out the product FAQ for the complete list of common questions/answers.Easy and fun. Simple to use, with endless possibilities for entertainment and utility. Start your bonfire from across the yard, or kill the weeds between your cracks in style. The XM42 is technically an extended-reach torch.Fill the tank with gasoline, ignite the pilot torch, and press the trigger button to send a blast of flaming fuel 25+ feet away. It's every pyromaniac's dream, and has numerous practical purposes!EFFECTIVE RANGE:25 to 35 feet depending on fuel used and environmental conditions (altitude, temperature, wind).FUEL CONSUMPTION:The fuel reservoir can allow for up to 30 seconds of constant full-on operation (if you so desired). The trigger switch can be operated momentarily for bursts of flames or held down until the tank is empty for a long stream.HOW TO "RELOAD":Simply turn off the pilot torch, open the fuel tank cap, and pour your fuel in. No worries about pressurization or needing to mix any additives.Approved fuels: Gasoline (any unleaded), gasoline-diesel mixture, or alcohol. Firefighters and controlled burn specialists typically use 30% diesel, 70% gasoline. Diesel won’t burn unless the ambient temperature is extremely high (126°F). The gasoline burning keeps the diesel above its flash point, and the nature of diesel keeps it around long enough to completely incinerate the foliage it is directed at.BATTERY LIFE:The XM42 includes a rechargeable lithium-polymer battery and charger. Fully charged, the battery will hold around 12.6 volts. In our testing, we’ve been able to use the system for at least 50+ tank refills with the voltage still within safe levels (above 10 volts). It is important for lithium polymer batteries to remain above a particular voltage. In this battery’s case, 10 volts is the level where charging is an absolute must.REQUIRED ACCESSORIES:A butane (or propane/butane mix) fuel canister feeds the pilot torch. These are available at most department stores with a Camping/Outdoors section (Wal-Mart, etc.), outdoor/sporting goods stores, and online retailers such as Amazon. The kitchen style butane canisters are also available at most restaurant supply stores (Gordon Food Service, etc.).WHAT’S IN THE BOX:XM42 flamethrower12.6 volt (3S) lithium-polymer battery (installed)quick voltage testercharger (100-240V AC, US plug)detailed user manualUser Manual: http://xm42.com/XM42_User_Manual.pdfInstructional Video: https://www.youtube.com/watch?v=NqVynvXbe4E***NOTE: Before we ship you must electronically sign a liability waiver***Each XM42 is hand-assembled in the USA using over 50 different components, us..
Showing 1 to 40 of 118 (3 Pages)
Free Shipping to CONUS,  APOs,  US Possessions & Islands on orders over $200.